NocorGreen Well Short™: A New Generation of Bio-Based Corrosion Inhibitors for Venezuela’s Heavy and Extra-Heavy Oil Fields

Aloetrade America introduces a specialized green corrosion-control solution designed for the demanding production environments of the Orinoco Oil Belt and Lake Maracaibo

Corrosion remains one of the most persistent operational challenges in the oil and gas industry. In Venezuela, this challenge takes on particular importance in the production of heavy and extra-heavy crude oil, especially in the Orinoco Oil Belt and the fields of Lake Maracaibo.

High concentrations of hydrogen sulfide (H₂S), iron sulfide deposits, asphaltenes, produced-water chemistry and demanding operating conditions create a complex environment in which conventional corrosion-control programs must deliver reliable and continuous protection.

At the same time, international oil companies and oilfield service providers are under increasing pressure to reduce the environmental footprint of their operations, improve chemical-handling safety and implement more sustainable production technologies.

Orinoco Belt oilfield

In response to these challenges, Aloetrade America LLC introduces NocorGreen Well Short™, a concentrated, bio-based corrosion inhibitor specifically developed for heavy and extra-heavy crude oil production environments in Venezuela.

This product continues Aloetrade’s strategy of developing sustainable, plant-derived chemical technologies for the oil and gas industry, while introducing a formulation architecture adapted to the particular characteristics of Venezuelan crude oil production.

Designed specifically for Venezuela’s heavy and extra-heavy crude environments

NocorGreen Well Short™ was developed to address operating conditions that are not fully covered by conventional corrosion-inhibitor formulations designed primarily for medium- and light-crude production systems.

The Orinoco Oil Belt and Lake Maracaibo present distinctive challenges, including:

  • Chronic H₂S exposure and associated sour-service corrosion risks.
  • Iron sulfide (FeS) deposition and the presence of corrosion-related deposits.
  • High asphaltene content, which can complicate the accessibility of metal surfaces and the performance of chemical treatments.
  • Typical production temperatures in the 45–66 °C range described for the target applications.
  • Complex interactions between produced water, crude oil, dissolved gases and metal surfaces.

NocorGreen Well Short™ has been designed around these specific conditions, with particular attention to protective-film formation, asphaltene management and complementary iron chemistry.

Its formulation combines concentrated natural polysaccharides, plant-derived saponins and sodium gluconate.

Polysaccharides offer a protective film formation, since they come from natural polymers with the ability to interact with metal surfaces. In this formulation, it is intended to promote adsorption and the formation of a protective film on steel, helping to reduce the direct interaction between corrosive species and the metal surface.

Aloe vera extracts provide polysaccharides and other plant-derived constituents that contribute to the formulation’s functional matrix.

Our aloe-derived saponins contribute surface-active properties that can support the dispersion of organic deposits and help maintain access to the metal surface for the corrosion-inhibiting components.

Finally, sodium gluconate provides complementary iron-complexing activity, contributing to the management of dissolved iron species within the treatment system.

Together, these components create a multi-functional formulation designed for the combined challenges of sour heavy-oil production.

How does it compare with conventional synthetic corrosion inhibitors?

Most traditional oilfield corrosion-inhibitor programs rely on synthetic chemical families, including imidazoline derivatives, amine-based compounds, quaternary ammonium compounds and other petrochemical-derived film-forming chemistries.

These products have an established history of application in oil and gas operations and can provide effective corrosion protection when correctly selected and optimized.

However, their environmental and operational profiles vary significantly. Some formulations may contain substances that require particular attention because of aquatic toxicity, persistence, handling hazards or disposal requirements. Certain conventional products also rely on synthetic solvents, surfactants and other formulation auxiliaries.

NocorGreen Well Short™ offers a different approach: using predominantly renewable, plant-derived materials to develop a corrosion-control formulation designed for demanding oilfield applications.

Green Corrosion Inhibitor for Oil Wells
Green Corrosion Inhibitor for Oil Wells

Its principal differentiating characteristics include:

  • Bio-based formulation: approximately 99.8% bio-based material, according to the product formulation specification.
  • Aloe-based technology: incorporates Aloe vera polysaccharides and other plant-derived functional components.
  • Natural film-forming polymer: uses low-molecular-weight chitosan as a principal protective-film component.
  • No synthetic biocide reinforcement: formulated without CMIT/MIT or glutaraldehyde.
  • No propylene glycol or triethanolamine: avoids these conventional formulation auxiliaries.
  • Biodegradability-oriented design: developed to provide a more favorable environmental profile than selected conventional chemical alternatives.
  • Concentrated supply format: manufactured without added dilution water, reducing the amount of product volume and weight transported per unit of concentrate.

The objective is not simply to offer another corrosion inhibitor. It is to provide oilfield operators with an alternative chemistry platform that combines corrosion-control functionality with a more sustainable raw-material profile.

A concentrated product designed for field dilution

One of the practical advantages of NocorGreen Well Short™ is its concentrated, water-free-added manufacturing format.

Unlike the standard NocorGreen Well HO formulation, which is supplied as a ready-to-use product, NocorGreen Well Short™ is manufactured and packaged as a concentrate for dilution at the operating location.

This approach offers several potential logistical advantages:

  • Lower transportation volume per unit of concentrated product.
  • Reduced packaging and storage requirements compared with transporting an equivalent quantity of ready-to-use diluted formulation.
  • Flexibility to prepare the working solution according to the operator’s treatment requirements.
  • Faster preparation.

Before injection, the operator prepares a working solution by diluting one part of concentrate into approximately 80–100 parts of treated or injection water, following the product’s technical instructions.

The resulting working solution is then dosed into the wellhead, production line or designated treatment point.

The proposed initial treatment ranges vary according to operating severity, H₂S exposure, asphaltene content and the well’s corrosion history.

These values are intended as starting points for field qualification and must be confirmed through corrosion coupons or electrochemical monitoring systems such as ER/LPR probes before establishing a definitive commercial treatment program.

A sustainable alternative for the Venezuelan oil industry

The development of NocorGreen Well Short™ is part of Aloetrade America LLC’s broader commitment to introducing plant-derived technologies into industrial chemical applications traditionally dominated by synthetic formulations.

The product is designed around renewable botanical resources, including Aloe vera cultivated and processed in Venezuela, together with other natural and plant-derived ingredients.

Aloe plantation in Anzoátegui state, Venezuela

This creates an additional strategic advantage: the technology can be manufactured locally, using Venezuelan agricultural resources and industrial capabilities.

The formulations are owned by Aloetrade America LLC and manufactured under license in Venezuela by Suministros Universales Otasan C.A. at its BioAloe de Caigua industrial facility.

The Aloe vera raw material is sourced from BioAloe’s own plantations in Anzoátegui State, supporting the development of a local supply chain that connects agriculture, industrial processing and oilfield chemical manufacturing.

BioAloe manufacturing plant in Venezuela
BioAloe manufacturing plant in Venezuela

This model contributes to the development of Venezuelan industrial capabilities and offers international operators an opportunity to evaluate a locally manufactured, plant-derived chemical solution.

Supporting ESG objectives in oil and gas operations

Environmental, Social and Governance (ESG) considerations are increasingly relevant to international oil companies, drilling contractors, production companies and oilfield service providers.

Chemical selection is an important part of this process because it affects not only operational performance but also worker exposure, transportation, storage, environmental discharge and waste management.

NocorGreen Well Short™ has been developed with these considerations in mind.

Its predominantly bio-based composition, absence of selected synthetic biocides and formulation auxiliaries, and concentrated supply format offer potential advantages for operators seeking to improve the environmental profile of their chemical programs.

For companies operating in Venezuela, this is particularly relevant when evaluating technologies that can combine local manufacturing, supply-chain resilience and more sustainable chemical management.

The product also provides an opportunity to progressively integrate green chemistry into established production operations without requiring operators to abandon their existing corrosion-monitoring and chemical-management procedures.

Developed for the Orinoco Oil Belt and Lake Maracaibo

NocorGreen Well Short™ is intended for heavy and extra-heavy crude oil production wells, particularly those associated with the Orinoco Oil Belt and Lake Maracaibo.

Its formulation is designed for systems characterized by chronic H₂S exposure, significant asphaltene content and the operating temperature range identified for these applications.

It can also be evaluated as part of an integrated chemical-treatment program alongside other Aloetrade technologies, including STOPSCALE™, ALOECIDE™, ALOEFLOW™, ALOEGEL™, DRAGALOE™ and ALOEFRICRED™.

The objective is to provide operators with a coordinated portfolio of plant-derived solutions addressing different production challenges, rather than relying exclusively on isolated chemical treatments.

Every application should be qualified according to the well’s metallurgy, produced-water chemistry, H₂S and CO₂ concentrations, temperature, flow regime and existing treatment program.

A new opportunity for international oil companies and oilfield service providers

Venezuela’s heavy and extra-heavy oil sector requires specialized chemical technologies capable of addressing complex production conditions.

NocorGreen Well Short™ offers international oil companies, production operators, drilling contractors and oilfield service providers an opportunity to evaluate a new generation of bio-based corrosion-control chemistry specifically adapted to these environments.

Aloetrade America LLC invites interested companies to request technical information, discuss laboratory evaluations and coordinate controlled field trials.

Comparative testing against existing corrosion inhibitors can establish the product’s suitability in terms of corrosion rate reduction, protective-film performance, dosage requirements, compatibility with other production chemicals and environmental characteristics.

Our objective is clear: to bring a new generation of sustainable, locally manufactured and technically specialized chemical solutions to Venezuela’s oil and gas industry.

NocorGreen Well Short™ represents the continuation of Aloetrade’s green chemistry strategy, adapted to the distinctive requirements of heavy and extra-heavy crude oil production in the Orinoco Oil Belt and Lake Maracaibo.

Aloetrade America LLC
Technology owner and developer of sustainable aloe-based industrial chemical solutions
Miami, Florida, USA

Manufactured under license in Venezuela by Suministros Universales Otasan C.A.
BioAloe de Caigua Industrial Facility – Anzoátegui, Venezuela

For technical information, product qualification and field-trial opportunities, please contact the Aloetrade America technical and commercial team.

Contact Information

ALOETRADE AMERICA LLC
ALOETRADE AMERICA LLC

For more information, please write to info (at) aloetradeamerica.com or visit our contact page.

Contact us via WhatsApp or visit our social media channels for further information about our company.

Thank you.

corrosion inhibitor, Venezuela, Orinoco Belt, Maracaibo, green, sustainable, chemistry, Heavy, Extra-Heavy, Oil Fields, oilfield company, drilling, contractor, production, oil, gas, well, ESG, polymer, H₂S exposure, asphaltene content