🎯 INFORMATION REQUIRED TO PERFORM A TEST WITH OUR GREEN DRA (DRAG REDUCING AGENT)
📌 SECTION 1: PIPELINE & FLUID INFORMATION
🔧 Pipeline Material
→ e.g. Carbon steel – API 5L
🧪 Fluid Type & Composition
→ Crude oil, produced water, gas condensate
→ Include chemical composition
📏 Pipeline Diameter & Length
→ Length of test zone: 500–1000 m
→ Diameter (specify in mm or inches)
📆 Pipeline Age
→ Include year of installation or operational years
🧱 Internal Roughness
→ Frictional condition of the internal wall
🧹 Debris Composition
→ Indicate type: paraffin, sand, rust, biofilms, etc.
🌡️ SECTION 2: OPERATIONAL CONDITIONS
⛽ Pressure
→ Typically 20–60 bar (300–900 psi)
🔥 Temperature
→ Range: 40–80°C
🌊 Flow Regime
→ Stratified or slug flow
🏁 Flow Stability, Velocity & Pressure
→ Monitor ΔP and flow turbulence
💧 SECTION 3: WATER & EMULSION CHARACTERISTICS
⚗️ pH of Water Phase
🧂 TDS / Salinity
🦠 Presence of SRB (Sulfate-Reducing Bacteria)
🛢️ Emulsions or Oil/Water Ratio
→ Specify percentage ratio
📦 SECTION 4: OPERATIONAL VOLUME & DELIVERY
🚚 Volume Transported per Day
→ Indicate in m³/day or bbl/day
💧 Type of Product Transported
→ API gravity, viscosity, chemical makeup
🧴 Pump System for Injection
→ Type and flow rate (L/min or gal/min)
📈 Product Flow Rate
→ Required for precise dosing calculations
🧪 SECTION 5: TRIAL DESIGN & TESTING METHOD
⏳ Minimum Trial Duration
→ 2 to 4 days
💉 Suggested Dose
→ 800 to 1000 PPM
📉 Method of Evaluation
→ ΔP reduction
→ System stability (within 24–72 hours)
→ Observation of sediment formation or residue
🧪 Evaluation Tools
→ Pressure gauges, inline sensors, flowmeters, fluid samplers
✅ Call to Action:
🟢 Test our Green DRA Solution Today!
→ Biodegradable, efficient, and ESG-compliant
→ Contact us for tailored technical assistance
🌐 www.aloetradeamerica.com